Skip to main content
Skip table of contents

Topology: Stacking on shelf storage space

General

Stacking on a shelf space is to be used in the warehouse. The configuration and rules for stacking in the rack are described in more detail here.


Shelf setup with stacking

Solution available from version 2.91.

Warehouse overview - Node info: Start ‘Add sub-nodes - Create high rack’.

MUST selection: Storage bin type = DynamicShelfStacking

The height should be taken into account. The height determines how many storage units can be stacked in the storage bin.


Rules for stacking on the shelf space

Rule

Description

1

Storage bin type = DynamicShelfStacking

The storage bin node has been created with the correct storage bin type = DynamicShelfStacking.

2

Dimensions

The dimension of the topology node is large enough to accommodate the loading aid.

The length/depth and width must fit.

The height of several storage units must be totalled and fit.

3

Loading aid type

Suitable for stacking = 1

The Suitable for stacking property is activated for the loading equipment.

4

Stacking factor on the article master

Article - Packaging units

The entry for the loading equipment in the packaging units must be available with a suitable stacking factor.

Stacking factor = empty; no limit for stacking.

Stacking factor = 1; no stacking possible for only 1 pallet.

Stacking factor = 2; stacking possible for 1+1 pallet.

5

Relocate LE’ function

Stacking on the shelf is only enabled for manual relocation with ‘Relocate SU’!


Warning message

Warning message

Description

Posting to ‘Relocate SU’ does not allow an additional posting with stacking on the shelf space!

The COGLAS message does not state a cause.

Check the ‘Rules for stacking on the shelf space’. As a rule, one of them is violated and does not allow the booking.

Example:

  • Article master packaging units states stacking=1, therefore no stacking possible.


→ back to COGLAS processes
→ back to COGLAS menu

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.